Heavy duty construction, ready to work under the hardest working conditions.
Easy and safe assembling and dismantling. Designed and manufactured according EN-12158 European Standards..
Rack and Pinion Material Hoist
T3-05 Rack and Pinion Material Hoist
Heavy duty construction, ready to work under the hardest working conditions.
Easy and safe assembling and dismantling. The tie-up to the building and mast sections can be made from inside the cabin.
Great installation to the façade: on scaffolding, in a lift shaft, etc.
The rack-and-pinion lifting system requires a minimum maintenance and is safe, reliable and versatile.
All TORGAR hoists are designed and manufactured complying with EN-12158 European Standards.
Main Features
- Fully manufactured hot dipped galvanized steel and aluminium: superior strength and long-life performance.
- Base frame with and levelling spindles.
- Cabin with three ramps.
- Electronic control panel: reliable and versatile. It also allows to manage call pushbuttons on every floor.
- Optional control panel ready to be connect to 220 V single phase electrical supply.
- Overspeed emergency brake installed on an independent pinion stops the cabin in case of abnormal speed during the descent.
- Double door on every floor: 1,1-meter height, with baseboard and security limit switch.
T3-10/15 Rack and Pinion Materials Hoist
Heavy duty construction, ready to work under the hardest working conditions.
Easy and safe assembling and dismantling. The tie-up to the building and mast sections can be made from inside the cabin.
The rack-and-pinion lifting system requires a minimum maintenance and is safe, reliable and versatile.
All TORGAR rack and pinion hoists are designed and manufactured complying with EN-12158 European Standards.
Main Features
- Fully manufactured in hot dipped galvanized steel and aluminium: superior strength and long-life performance.
- Base frame with wheels and levelling spindles.
- Safety base enclosure, 2 meters height, with security switch on every door.
- Cabin with two doors and one ramp, removable and interchangeable.
- Cabin with two assembling ramps: allows assembling the hoist in different positions.
- Electronic control panel: reliable and versatile. Also allows to manage call pushbuttons on every floor.
- Overspeed emergency brake installed on an independent pinion. It stops the cabin in the event of a sudden increase of the speed during the descent.
- Overload sensor.
- Rack and pinion constructed in module 8, obtaining the highest strength and reliability.
- Telescopic ties with tightening screws: strong support and perfect mast verticality.
- Double door on every floor: 1,1-meter-high, with toeboard and limit switch.
T3-20/25 Rack and Pinion Materials Hoist
Heavy duty construction, ready to work under the hardest working conditions.
Easy and safe assembling and dismantling. The tie-up to the building and mast sections can be made from inside the cabin.
The rack-and-pinion lifting system requires a minimum maintenance and is safe, reliable and versatile.
All TORGAR rack and pinion hoists are designed and manufactured complying with EN-12158 European Standards.
Main Features
- Fully manufactured in hot dipped galvanized steel and aluminium: superior strength and long-life performance.
- Base frame with wheels and levelling spindles.
- Safety base enclosure, 2 meters height, with security
- switch on every door.
- Cabin with two removable and interchangeable doors and one ramp.
- Cabin with two assembling ramps: allows assembling the hoist in different positions.
- Square mast.
- Electronic control panel: reliable and versatile. Also allows to manage call pushbuttons on every floor.
- Overspeed emergency brake installed on an independent pinion stops the cabin in case of abnormal speed during the descent.
- Overload limit device.
- Rack and pinion constructed in module 8, obtaining the highest strength and reliability.
- Telescopic ties with tightening screws: strong support and perfect mast verticality.
- Double door on every floor 1,1meter height, with baseboard and security limit switch.
T3-03 Rack and Pinion Material Hoist
Heavy duty construction, ready to work under the hardest working conditions.
Easy and safe assembling and dismantling. The tie-up to the building and mast sections can be made from inside the cabin.
The rack-and-pinion lifting system requires a minimum maintenance and is safe, reliable and versatile.
All TORGAR rack and pinion hoists are designed and manufactured complying with EN-12158 European Standards.
Main Features
- Fully manufactured in hot dipped galvanized steel and aluminium: superior strength and long-life performance.
- Base frame with wheels and levelling spindles.
- Cabin with two assembling ramps
- Electronic control panel: reliable and versatile. Also allows to manage call pushbuttons on every floor.
- Overspeed emergency brake installed on an independent pinion stops the cabin in case of abnormal speed during the descent.
- Double door on every floor: 1,1-meter-high, with toeboard and limit switch.